7.Do not allow the utility pump to run dry. Fill the pump (23) chamber with liquid before operation. Failing to do so may damage the seal ring (22), which depends on the liquid for its lubrication.

8.In cold weather, when the utility pump is not in use, protect the interior of the pump from freezing by draining the liquid and pumping a permanent type automobile antifreeze containing a rust inhibitor through the system. A 50% mixture with water is recommended. Be sure to thoroughly flush the system with a neutralizing liquid prior to reuse of the unit.

9.If used on a boat, read and understand all instructions and safety precautions as outlined in the manufacturer’s manual for the boat on which the utility pump will be used.

10.Lead-acid batteries generate hydrogen gas during normal operation. Hydrogen gas is: explosive and highly flammable.

11.If connecting the utility pump temporarily to a lead-acid battery, wear ANSI approved, safety impact eye goggles.

12.Avoid contact with battery acid. If splashed, immediately wash affected area with clean water. Continue washing area until medical help is available.

13.If the utility pump is used on a boat, turn off the boat ignition before making power cord (1) connections.

14.If used on a boat, always connect the red power cord (1) on the utility pump to the positive (+) side of the boat’s 12 volt DC electrical system.

15.Connect the black power cord (1) on the utility pump to the negative (--) side of the boat’s 12 volt electrical system.

16.When connecting the power cords (1) to the boat’s 12 volt DC electrical system, connect the red power cord first. Then, connect the black power cord. When disconnecting the power cords from the electrical system, disconnect the black power cord first. Then, disconnect the red power cord.

17.Turn the boat’s ignition switch to its “off” position and disconnect the utility pump from the boat’s 12 volt DC electrical system before performing any inspection, adjustments, maintenance, or cleaning procedures on the pump.

18.Do not submerge the utility pump in water.

19.People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.

Page 4

For technical questions, please call 1-800-444-3353.

SKU 9576,

 

 

94639

Page 3 Page 5
Page 4
Image 4
Harbor Freight Tools 9576, 94639 manual For technical questions, please call
Page 3 Page 5

94639, 9576 specifications

Harbor Freight Tools has established itself as a go-to destination for high-quality yet affordable tools and equipment. Among its extensive product offerings, two standout items are the 9576 and 94639 models, both known for their reliability and performance in various applications.

The Harbor Freight Tools 9576 is recognized primarily as a heavy-duty tool storage solution. This tool chest is built with a solid steel construction, ensuring durability and a long lifespan even when subjected to rigorous use. One of its standout features is the multiple drawers that provide ample storage space for tools of various sizes. Each drawer is equipped with smooth gliding ball-bearing slides, allowing for easy access to stored items. The upper compartment typically includes a removable tray for smaller parts, which adds to its organizational capability.

In terms of security, the 9576 comes with a lock and key system, ensuring that valuable tools and equipment are safely stored while not in use. Its sleek design and powder-coated finish offer an aesthetically pleasing addition to any garage or workshop. The rolling casters allow for easy mobility, ensuring that it can be moved around freely.

On the other hand, the Harbor Freight Tools 94639 is a high-performance air compressor designed for versatility and efficiency. This unit is powered by a robust motor, providing the necessary air pressure for a range of tasks, from inflating tires to operating pneumatic tools. The 94639 features an oil-free pump, which minimizes maintenance while maintaining optimal performance.

In terms of portability, the 94639 is designed with a lightweight construction and includes a convenient carry handle, making it ideal for home use or job site applications. Another significant characteristic is its quiet operation, allowing for use in residential areas without causing disturbances. The built-in pressure gauge helps users monitor air pressure levels, ensuring that they can complete tasks with precision.

Both models showcase Harbor Freight Tools’ commitment to innovation and quality. The 9576 excels in tool storage and accessibility, making it a perfect choice for tradespeople and DIY enthusiasts alike, while the 94639’s reliability and efficiency make it an essential tool for air-powered applications. With their outstanding features and practicality, both the 9576 and 94639 exemplify why Harbor Freight Tools is a trusted name in the tool industry.
Top Page Image Contents