6.Insert the Handle Shaft (26) between the two Wheel Assembly Frames
(20). Attach the Pivot and Bracket Assembly (19) to the Wheel Assem- bly Frames and Handle Shaft, using two Bolts (11) and two Nuts (21).
(See Figure F.)
HANDLE SHAFT
(26)
|
| NUT |
| |
(21) | PIVOT | |||
|
|
| & | |
|
|
| BRACKET | |
|
|
| ASSY. | |
BOLT | (19) | |||
HOPPER | ||||
(11) |
|
| ||
|
| (16) | ||
|
|
| ||
WHEEL ASSY. |
|
|
| |
|
| |||
FRAME |
| |||
(20) |
|
|
| |
FIGURE F
HANDLE SPACER
(1)
UPPER | FLAT WASHER (48) | |
HANDLE | ||
|
(23)NUTS (21)
| GAUGE | |
| & LEVER | |
BOLT | ASSY. | |
(4) | ||
(11) | ||
|
FIGURE G
8.Unscrew and remove one Lock Nut (24) from the Control Rod (25). Insert the threaded portion of the Control Rod into the hole in the Pivot and Bracket Assembly (19). Then
(See Figure H.)
7.The Upper Handle (23) features three positions for operating comfort. To use the middle or upper positions, place the Handle Spacer (1) between the mounting holes nearest to the Handle Covers (15). Insert a Bolt
(11)through the Upper Handle (23), through the Handle Spacer, through the other Upper Handle and secure with a Flat Washer (48) and Nut (21). Install the Gauge & Lever Assembly
(4)on the left hand side, using two Bolts (11) and two Nuts (21).
(See Figure G.)
FIGURE H
CONTROL ROD
(25)
PIVOT & ASSY.
BRACKET
(19)
LOCK
NUT
(24)
9.Insert the Adjust Connect Rod (46) into the Shut Off Plate (27). Then secure the Adjust Connect Rod to the Shut Off Plate, using one Flat Washer (48) and
SKU 99623 | For technical questions, please call | Page 6 |
