Remote Control Functions
0Power On Button
1 IR Transmitter Window
2 Mute
3 Power Off Button
4 Input Selectors
5 AVR Selector
6 AM/FM Tuner Select
7 Test Button
8 Sleep Button
9 Surround Mode Selector A Night Mode
B Channel Select Button C ⁄/ ¤ Buttons
D ‹ Button E Enter Button
F Digital Select/Direct Button G Numeric Keys
H Tuner Mode I Volume Up/Down J Tuning Up/Down K Speaker Select L Transport Controls M › Button
N RDS Select Button O Preset Up/Down P Clear Button Q Memory Button
Delay
NOTE: The function names shown here are each button’s feature when used with the AVR. Most buttons have additional functions when used with other Harman Kardon devices.
See page 26 for a list of these functions.
a
f
g
v
t
`
u
m
n
j
p
q
x
b
d
e
y
r
s
o
w
l
7
k
8
c
z
IMPORTANT NOTE: The AVR 1550’s remote is shipped from the factory to operate the
AVR 1550 and most Harman Kardon CD or DVD players and cassette decks.
AVR 1550
Before using the remote, it is important to remember to press the Input Selector button
4that corresponds to the unit you wish to operate.
It is also important to remember that many of the buttons on the remote take on different functions, depending on the product selected using the Input Selectors. The descriptions shown here primarily detail the functions of the remote when it is used to operate the
AVR 1550. (See page 26 for information about alternate functions for the remote’s buttons.)
0Power On Button: Press this button to turn on the power.
1IR Transmitter Window: Point this window towards the AVR 1550 when pressing buttons on the remote to make certain that infrared commands are properly received.
2Mute: Press this button to momentarily silence the AVR 1550 or TV set being controlled, depending on which device has been selected.
3Power Off Button: Press this button to place the AVR 1550 in the Standby mode.
4Input Selectors: Pressing one of these buttons will perform three actions at the same time. First, if the AVR is not turned on, this will power up the unit. Next, it will select the source shown on the button as the input to the AVR. Finally, it will change the remote control so that it controls the compatible Harman Kardon prod- uct selected. After pressing one of these buttons you must press the AVR Selector button 5
REMOTE CONTROL FUNCTIONS 9
