Front Panel Information Display
AMute:This indicator illuminates
to remind you that the AVR45’s out-
put has been silenced by pressing
the Mutebutton Ûd. Press the
Mute button again to return to the
previously selected output level.
BBypass:This indicator illumi-
nates when the surround processing
has been disabled by pressing the
Surround Offbutton Ú. When this
indicator is lit, the AVR45 will play tra-
ditional stereo sound using the front
left and front right speakers only.
CAnalog:This indicator illuminates
when an analog input source is in use.
DDolby Digital Indicator:This
indicator illuminates when a Dolby
Digital source is being played.
EOptical Source:This indicator
illuminates when a digital source
is in use via a connection to the
Optical Digital input ·.
FAnalog Dolby Surround Mode
Indicators:These indicators illumi-
nate when one of the analog (matrix)
Dolby Surround modes is in use.
GCoax Source:This indicator illu-
minates when a digital source is in
use via a connection to the Coaxial
Digital input °.
HAC-3* Indicator:This indicator
illuminates when the AVR45 is
decoding a Dolby Digital input
source.
IPCM Indicator:This indicator
illuminates to show that a standard
PCM (SP/DIF) digital audio signal
is being decoded by the digital-to-
analog converter.
JAnalog Surround Mode
Indicators:These indicators illumi-
nate when one of the DSP generated
analog surround modes is in use
with an analog input source.
KNight Indicator:This indicator
lights when the AVR45 is in the Night
mode, which prevents the AVR45
from loud playback when digital
sources are in use.
LPreset Number:This two-digit
display indicates the station preset
number that is currently in use, or
that is being entered.
MPreset Indicator:This indicator
illuminates when one of the stations
entered into the preset memory is
tuned. The number that appears
below the indicator is the preset
station’s memory.
NMemory:This indicator flashes
whenentering presets and other
informationinto the tuner’s memory.
OAuto:This indicator illuminates
when the “Auto” mode is in use for
FM tuning.
PStereo Indicator:This indicator
illuminates when an FM station is
being tuned in stereo.
QMono Indicator:This indicator
illuminates when the tuner has been
placed in the monaural mode by
pressing the TuneMode button *.
Set the tuner for mono listening to
cut noise and improve the quality of
distant stereo signals.
RTuned Indicator:This indicator
illuminates when a station is being
received with sufficient signal
strength to allow for acceptable
listening quality.
SMain Information Display:This
display shows messages relating to
the status, input source, surround
mode, tuner, volume level or other
aspects of unit’s operation.
TSleep Indicator:This indicator is
illuminated when the Sleep function
is in use. The number that appears
above the indicator is the number of
minutes remaining before the AVR45
will return to the Standby mode.
8
AVR45 om (G).Eng,Fr 4/16/99 11:41 AM Page 8