Front Panel Controls
6
&Preset Stations Selector: Press this button to select stations that have been entered into the preset memory. (See page 26 for more information on tuner programming.)
*Tune Mode: Press this button to select the stereo or mono mode for FM tuning. In the STEREO mode a Stereo indicator P will illuminate in the information display, and stereo reception will be provided when sta- tions are transmitting stereo signals. In the MONO mode the left and right signals from stereo broadcasts will be mixed together and reproduced through all channels. Select MONO for better reception of weak signals.
(Dolby Digital Selector: Press this button to select the Dolby Digital surround mode when listening to a program that carries the Dolby
Digital information. (See pages 22– 25 for more information on surround modes and digital audio.)
îDolby Pro Logic Selector: Press this button to select the Dolby Pro Logic surround mode when listening to an analog program that is encoded with
ïDolby 3 Stereo Selector: Press this button to select the Dolby 3 Stereo listening mode. This mode is used primarily when a program has surround information when a center channel speaker, but no surround speakers, is installed. (See pages
ðAnalog Surround Mode Selectors: Press one of these buttons to select the analog sur- round modes. These modes may be used with any analog program source to create a pleasing surround effect. (See pages
ñTest Tone: Press this button to
begin the sequence of steps used to set the AVR45’s output levels. When this button is pressed, a test tone will replace the currently selected listen- ing source. (See page 19 for more information on using the test tone to set the output levels.)
òSurround Off: Press this button to turn off all surround processing, and to listen to a program in tradi- tional stereo from the left front and right front speakers only.
óMute: Press this button to
momentarily silence the speaker output of the AVR45.
ôVolume Control: Turn the knob clockwise to increase volume, counterclockwise to decrease the volume.
õDelay: Press this button to begin the sequence of steps required to enter delay time settings. (See page 20 for more information on delay times.)
öDigital Input Selector: When playing a source that has a digital output, press this button to select between the Optical á and Coaxial
¡ Digital inputs. (See pages
÷Set Button: When making choices during the setup and con- figuration process, press this button to enter the desired setting, as shown in the Information Display
33, into the AVR45’s memory. (See pages
øChannel Select: Press this button to begin the process of selecting and configuring the AVR45’s output channels. (See pages
ùSpeaker Select Button: Press this button to begin the process of selecting the speaker positions that are used in your listening room. (See pages
üSelector Buttons: When you are establishing the AVR45’s configura- tion settings, use these buttons to select between the choices avail- able, as shown in the Information Display 33.
33Information Display: This display delivers messages and status indications to help you operate the receiver. (See page 7 for a complete explanation of the Information Display.)
34Remote Sensor Window: The sensor behind this window receives infrared signals from the remote con- trol. Aim the remote at this area and do not block or cover it unless an external remote sensor is installed.
