Harman-Kardon AVR80 owner manual If the remote room is equipped, Main Room Operation

AVR80 manual 11/01/98 13:01 Side 33

Multiroom Operation

33

ENGLISH

3.When the source is selected, press the Û button until the > cursor is next to

RETURN TO MAIN MENU. Press

SELECT.

4.At the MAIN MENU, press the Û button once so that the > cursor is pointing to SET UP MENU. Press

SELECT.

5.This will bring SET UP MENU 1 (Figure #2) to the screen. Press the Û button twice until the > cursor is pointing to GO TO SET UP MENU 2. Press SELECT.

6.When SET UP MENU 2 (Figure #3) appears, the > cursor will be pointing to M ULT I R M VOL. Use the Üor Ý buttons qon the remote to select one of the following choices.

a.If the remote room is equipped

with a remote receiver only, volume control will be performed by the AVR 80 using a remote control in the second room. For this type of control, select the VARIABLEoption.

b.If the volume control in the remote room will be controlled by the amplifier in the remote room, or if a specialized amplifier such as the AudioAccess AVX-603 will be used, select FIXED.

7.After making a selection, press the Û button once so that the > cursor is next to SET LEVEL.

8.Use the Üor Ýbuttons qon the remote to establish a volume level for turn on or constant level, as determined by the previous selection.

a.If VARIABLEvolume has been selected, this setting will determine the volume level for the remote room each time it is turned on.

b.If FIXEDvolume has been selected, this level will be the constant volume level at the remote room location unless a local volume control is installed. Set the level as close to “0 dB” as possible without distorting the output signal.

9.When the level has been entered, press the Û button so that the > cursor is pointing to RETURN TO MAIN MENUand press SELECT.

10.At the MAIN MENU, use the navigational arrow buttons on the remote to exit from the main system.

The AVR80 is now configured for multi room operation.

Operation

Multi room operation is simple, and it may be controlled from either the main listening room where the AVR80 is located, or from a remote room where an IR receiver or AudioAccess keypad has been installed.

Main Room Operation

In this option, the remote room feed is controlled from the main listening room using the AVR80’s front panel controls.

M U L T I R O O M S E L E C T O R

> S E L E C T E D : T U N E R		T V
	C D	L D
	T A P E 1	V C R 1
O F F	T A P E 2	V C R 2
		A U X

R E T U R N T O M A I N M E N U

Figure 17

T U R N M U L T I - Z O N E O F F ?

U S E R S	M A Y B E L I S T E N I N G
I N O T H E R R O O M S
P R E S S	A G A I N	T O	P R O C E E D
O R " C L E A R "		T O	C A N C E L

Figure 18