INSTALLATION
Video 1 Source
Since this source includes audio and video recording output jacks, it is best suited to a video recorder, such as your VCR or DVR.
Referring to Table 2, connect your recorder to the Video 1 Analog Audio inputs and outputs and to any available coaxial or optical digital audio input (and the coax digital audio output). See Figure 19. Use either the Video 1
Figure 19 – Video 1 A/V Inputs and Outputs, and Digital Audio Inputs
Remember to connect the audio and video output jacks on your recorder to the Video 1 or digital audio input jacks on the AVR, and the audio and video input jacks on your recorder to the Video 1 or digital audio output jacks on the AVR.
NOTE: It isn’t possible to make recordings using HDMI or compo- nent video connections. Keep this in mind as you connect other source devices that you may wish to make recordings from.
Video 2 Source
The Video 2 source is used only for playback. The AVR 146 remote control is programmed to operate many brands and models of cable and satellite television devices, and we recommend connecting your cable or satellite
Referring to Table 2, connect your
inputs. Do not connect any video output on the television set to any video input on the receiver. See Step Five for information on connecting the receiver’s video monitor outputs to the television.
Video 3 Source
The Video 3 source is used only for playback. It is also generally reserved for components that are only temporarily connected to the receiver, such as cameras and game consoles, although the remote is preprogrammed to operate a TV when the Video 3 source is selected. When not in use, you may place the supplied covers over the front- panel Video 3 jacks for a cleaner appearance. Simply snap the covers in place. When you wish to use the jacks, gently press on the left side of each cover to pivot it out for removal.
Referring to Table 2, connect your camera or game console to the Video 3 Analog Audio inputs and to either the Coaxial 3 or Optical 3 digital audio input. See Figure 21. If possible, use the Component Video 2 inputs. Otherwise, connect the device’s
Figure 21 – Video 3 A/V and Digital Audio Inputs
DVD
The DVD source is used for a DVD player. If you have a multichannel device, such as a
Referring to Table 2, connect your DVD player to the DVD Analog Audio inputs and to the Coaxial 1 Digital Audio input. If possible, use the Component Video 1 inputs. Otherwise, connect the DVD player’s
Figure 20 – Video 2 A/V, DIgital Audio and Component Video Inputs
NOTE: If you receive your television programming using your TV with an antenna or direct cable connection, connect the TV’s analog and optical digital audio outputs (if available) to the Video 3 Analog Audio inputs and to one of the
Figure 22 – DVD A/V, digital Audio and Component Video Inputs
If your DVD player plays
Figure 23 –
22