Installation and Connections
SCART A/V Connections
For the connections described above your video device needs RCA (cinch) connectors or/and S- Video connectors for all Audio and Video signals: Any normal video device (Not SVHS or High 8) for only playback needs 3 RCA jacks, VCRs for record and playback even 6 RCA jacks. Any
Many european video devices are equipped with RCA (Cinch) or
In that case the following Scart to Cinch adapters or cables are needed:
Figure 1: SCART/Cinch-Adapter for playback; signal flow:
SCART → Cinch
Figure 2: SCART/Cinch-Adapter for record and playback; signal flow:
SCART ↔ Cinch
Figure 3: Cinch/SCART-Adapter for playback; signal flow:
Cinch → SCART
Black
Yellow
Red
Black
Red
Blue1
Yellow
Green1
White
Black
Yellow
Red
•Units for playback, such as satellite receivers, camcorders, DVD or LD players, need an adapter from Scart to 3 RCA plugs, see fig. 1 (normal video devices) or from Scart to 2 RCA+1 S- Video plugs, see fig. 4
•HiFi VCRs need an adapter from Scart to 6 RCA plugs, see fig. 2 (normal video), or from Scart to 4
•If you use only normal video devices the TV monitor needs an adapter from 3 RCA plugs to Scart (fig. 3) only. If also
Figure 4:
for playback;
signal flow:
SCART → Cinch
Figure 5:
for record and playback;
signal flow:
SCART ↔ Cinch
Figure 6:
for playback;
signal flow:
Cinch → SCART
Red
Black
Black
Red
Blue1
Yellow
Red
Black
1Also other colours possible, e.g. brown and grey.
Note that only the video plugs (the "yellow" cinch plug in fig. 3 and the
,and the volume on the TV must be reduced to minimum.
Important Note for Adapter Cables:
If the cinch connectors of the adapter you’ll use are labeled, connect the Audio and Video ”In” plugs with the corresponding Audio and Video ”In” jacks on the AVR 3000 (and with a VCR con- nect the ”Out” plugs to the ”Out” jacks on the AVR). Note that with some adapter types it may be just turned around: If no signal is audible/ visi- ble when the VCR is playing connect the “Out” plugs to the ”In” jacks on the AVR and turned around. If the adapter plugs are not labeled in that way, pay attention to the signal flow direc-
tions as shown in the diagrams above and in the instruction attached to the adapter. If uncertain, don’t hesitate to consult your dealer.
Important Notes for S-Video connections:
1.Only the
2.Like most common AV units the AVR 3000 does not convert the Video signal to
Important Note for the Use of
SCART-Cinch Adapters:
When video sources are connected to the TV directly with a SCART cable, specific control sig- nals apart from Audio/Video signals will be fed to the TV. These specific signals are: With all video sources, the signal for automatic input selection that switches the TV automatically to the appropriate input as soon as the video source is started. And with DVD players, the sig- nals automatically turning the TV to 16:9 format (with switchable 4:3 TVs) and turning the RGB video decoder of the TV on or off, depending on the DVD player´s setting. With any adapter cable, these control signals will be lost and the appro- priate setting of the TV must be made manually.
INSTALLATION AND CONNECTIONS 15
