Harman-Kardon AVR 510 owner manual Rear Panel Connections

Rear Panel Connections

¡Tape Inputs: Connect these jacks to the PLAY/OUT jacks of an audio recorder.

™Tape Outputs: Connect these jacks to the RECORD/INPUT jacks of an audio recorder.

£Video 1 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source.

¢AM Antenna: Connect the AM loop antenna supplied with the receiver to these terminals. If an external AM antenna is used, make connections to the AM and GND terminals in accordance with the instructions supplied with the antenna.

∞Video 1 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR.

§DVD Audio Inputs: Connect these jacks to the analog audio jacks on a DVD or other video source.

¶FM Antenna: Connect the supplied indoor or an optional external FM antenna to this terminal.

•CD Inputs: Connect these jacks to the out- put of a compact disc player or CD changer.

ª6-Channel Direct Inputs: If an external digital audio decoder is used, connect the out- puts of that decoder to these jacks.

‚Multiroom Outputs: Connect these jacks to an optional audio power amplifier to listen to the source selected by the mulitroom system in a remote room.

⁄Amplifier Inputs: When the jumper pins that link the Preamp Outputs ¤ with these inputs are removed, these jacks may be used to connect an external source or the AVR 510’s multiroom system to the internal amplifiers. (See page 17 for more information on using these connections.)

¤Preamp Outputs: When the jumper pins that link the Amplifier Inputs ⁄ with these outputs are removed, these jacks may be con- nected to an external power amplifier.

‹Subwoofer Output: Connect this jack to the line-level input of a powered subwoofer. If an external subwoofer amplifier is used, con- nect this jack to the subwoofer amplifier input.

›Video Monitor Outputs: Connect this jack to the composite or S-Video input of a TV monitor or video projector to view the on-screen

menus and the output of any standard video source selected by the receiver’s video switcher.

fiSpeaker Outputs: Connect these outputs to the matching + or – terminals on your left and right surround speakers. When making speaker connections always make certain to maintain correct polarity by connecting the red

(+) terminals on the AVR 510 to the red (+) ter- minals on the speakers and the black (–) termi- nals on the AVR 510 to the black (–) terminals on the speakers. See page 15 for more informa- tion on speaker polarity.

flSwitched AC Accessory Outlet: This outlet may be used to power any device you wish to have turned on when the AVR 510 is turned on with the System Power Control button 2.

‡Unswitched AC Accessory Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regard- less of whether the AVR 510 is on or off.

Note: The total power consumption of all devices connected to the accessory outlets should not exceed 100 watts.

°AC Power Cord: Connect the AC plug to an unswitched AC wall output.

·Component Video Outputs: Connect these outputs to the component video inputs of a video projector or monitor. When a source connected to one of the two Component Video Inputs ab is selected the signal will be sent to these jacks.

aVideo 2 Component Video Inputs: Connect the Y/Pr/Pb component video outputs of a set top converter box or other video prod- uct to these jacks.

bDVD Component Video Inputs: Connect the Y/Pr/Pb component video outputs of a DVD player to these jacks.

cRemote IR Output: This connection per- mits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on Harman Kardon (or other compatible) equipment.

dRemote IR Input: If the AVR 510’s front- panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack.

eMultiroom IR Input: Connect the output of an IR sensor in a remote room to this jack to operate the AVR 510’s multiroom control system.

fDVD Video Inputs: Connect these jacks to the composite or S-Video output jacks on a DVD or other video source.

gVideo 1 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jack on a VCR.

hVideo 3 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source.

iVideo 2 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source.

jVideo 2 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jacks on a VCR.

kVideo 1 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source.

31Optical Digital Inputs: Connect the opti- cal digital output from a DVD player, HDTV receiver, LD player or CD player to these jacks. The signal may be either a Dolby Digital signal, a DTS signal or a standard PCM digital source.

32Coaxial Digital Inputs: Connect the coax digital output from a DVD player, HDTV receiver, LD player or CD player to these jacks. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not con- nect the RF digital output of an LD player to these jacks.

33Digital Audio Outputs: Connect these jacks to the matching digital input connector on a digital recorder such as a CD-R or MiniDisc recorder.

34Video 3 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source.

35Video 2 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source.

36Video 2 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR or other video source.

10REAR PANEL CONNECTIONS