TROUBLESHOOTING

SYMPTOMSOLUTION

If there is no sound from any of the speakers:

•Check that receiver/amplifier is on and a source is playing.

•Check that the powered subwoofer is plugged in and its Master Power Switch ‚ is switched on to the “•” position.

•Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, punctured or touching other wires.

•Review proper operation of your receiver/amplifier.

If there is no sound coming • Check the “Balance” control on your receiver/amplifier.

from one speaker: • Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, punctured or touching other wires.

•In Dolby Digital or DTS mode, make sure that the receiver/processor is configured so that the speaker in question is enabled.

•Turn off all electronics and switch the speaker in question with one of the other speakers that is working correctly. Turn everything back on, and determine whether the problem is in the same place (i.e., the speaker that was working previously now has no sound, and the speaker that was not working now sounds fine), or whether it has moved (i.e., the speaker that was not working still has no sound, and the speaker that was working is still fine). If the problem is in the same place, the source of the problem is most likely with your receiver or amplifier, and you should consult the owner’s manual for that product for further information. If the problem has followed the speaker, consult your dealer for further assistance or, if that is not possible, visit our Web site at www.harmankardon.com for further information.

If there is no sound from

• Check all wires and connections between receiver/amplifier and speaker. Make sure all wires are connected.

the center speaker:

Make sure none of the speaker wires are frayed, cut, punctured or touching other wires.

 

• If your receiver/processor is set in Dolby Pro Logic mode, make sure the center speaker is not in Phantom mode.

 

• If your receiver/processor is set in Dolby Digital or DTS mode, make sure the receiver/processor is configured so that

 

the center speaker is enabled.

 

 

If the system plays at low

• Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected.

volumes but shuts off as

Make sure none of the speaker wires are frayed, cut, punctured or touching other wires.

volume is increased:

• If more than one pair of main speakers is being used, check the minimum impedance requirements of your receiver/amplifier.

 

 

If there is low (or no) bass

• Make sure the SUB Input § or Line-Level Inputs of the SUB-TS18 subwoofer and SUB or LFE output

output:

of your receiver or amplifier are properly connected by the RCA-type interconnect cable.

 

• If you are using the SUB-TS18’s Speaker-Level Inputs ª, check your speaker cables to make sure they are all

 

connected; that none of the wires are frayed, cut, punctured or touching other wires; and that you have maintained the

 

correct polarity by connecting positive terminals to positive terminals, and negative terminals to negative terminals.

 

• Make sure the subwoofer is plugged into an active electrical outlet and its Master Power Switch ‚ is

 

switched on to the “•” position.

 

• Check the speaker setup (bass management) settings in your A/V receiver or processor to make certain that the front,

 

center and surround speakers are configured for “Small,” and that the subwoofer is set for “Yes” or “On.”

If there is no sound from • Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure

the surround speakers: none of the speaker wires are frayed, cut, punctured or touching other wires.

•Review proper operation of your receiver/processor and its surround sound features.

•Make sure the movie or TV show you are watching is recorded in a surround sound mode. If it is not, check to see whether your receiver/processor has other surround modes you may use.

•In Dolby Digital or DTS mode, make sure your receiver/processor is configured so that the surround speakers are enabled.

•Review the operation of your DVD player and the jacket of your DVD to make sure that the DVD features the desired Dolby Digital or DTS mode, and that you have properly selected that mode using both the DVD player’s menu

and the DVD disc’s menu.

14 TROUBLESHOOTING

Page 13 Page 15
Page 14
Image 14
Harman-Kardon HKTS 18 owner manual Troubleshooting, Symptomsolution
Page 13 Page 15

HKTS 18 specifications

The Harman-Kardon HKTS 18 is a five-piece home theater speaker system that combines sophisticated design with powerful audio performance. This system is crafted to deliver an immersive surround sound experience, making it an excellent choice for home cinema enthusiasts looking to enhance their audio setup.

At the heart of the HKTS 18 is its sleek satellite speaker design, which blends seamlessly with modern decor. The system comprises four identical satellite speakers, each featuring a 2.5-inch midrange driver paired with a 0.5-inch soft dome tweeter. This configuration ensures accurate reproduction of vocal and instrumental clarity, enhancing the overall listening experience. The satellite speakers can be mounted on walls or placed on stands, offering versatility in positioning.

The included 200-watt powered subwoofer is a standout feature of the HKTS 18. It packs a substantial punch thanks to its 8-inch low-frequency driver and built-in amplifier, delivering rich bass that adds depth to movies, music, and games. With adjustable volume and crossover controls, users can customize the subwoofer's output to fit their specific acoustical environment.

One of the significant technologies employed in the HKTS 18 is the Harman Display Surround technology. This feature optimizes the sound quality depending on the source material and ensures a captivating surround sound experience without compromising clarity or richness. Additionally, with its compact size and elegant design, the HKTS 18 can easily fit into any room while delivering outstanding sound performance.

The HKTS 18 also benefits from Harman’s years of engineering expertise, including advanced materials in speaker construction that minimize distortion and maximize audio fidelity. The speakers utilize a highly efficient magnetic shielding, which helps prevent interference with televisions and other electronic devices.

Furthermore, the HKTS 18 is compatible with various receivers and audio systems, making it versatile for different setups. It supports a wide range of frequencies, thereby providing effective performance across various types of media, whether it be movies, music, or gaming.

In summary, the Harman-Kardon HKTS 18 home theater speaker system exemplifies a perfect blend of style, function, and advanced audio technology. With its combination of satellite speakers, a powerful subwoofer, and proprietary sound technologies, the HKTS 18 is designed to bring a theater-like experience to the comfort of your home, making it an attractive option for those who demand quality audio.
Top Page Image Contents