SUB-TS18 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS
¡ Subwoofer-Level Control | ∞ Phase Switch | ª Speaker-Level Inputs |
™ High-Cut (Low-Pass) Filter Switch | § Line-Level Subwoofer (SUB) Input | ‚ Master Power Switch |
£ External Trigger Input | ¶ Line-Level Full-Range Inputs | ⁄ AC Power Cord |
¢ Audio-Sense On/Off Switch | • Speaker-Level Outputs | |
¡Subwoofer-Level Control: Volume may be adjusted using the Subwoofer- Level Control. Turn the control clockwise to increase the SUB-TS18’s volume, or counterclockwise to decrease it.
™High-Cut (Low-Pass) Filter Switch: Placing this switch in the ON position acti- vates circuitry that cuts out all audio input signals above 120Hz, allowing the SUB-TS18 to focus its power on reproducing the low- frequency portion of the signal, avoiding
inefficiency and distortion. Engage this filter when using the Speaker-Level Inputs ª, or when using the Line-Level Full-Range Inputs ¶, unless your receiver or processor processes its line-level output using a low- pass filter. The filter has no effect when the SUB Input § is used.
£External Trigger Input: Use the sup- plied mini-plug cable to connect the trigger output of another product to this jack. When a trigger signal between 3 and 30 volts (AC
or DC) is detected, the SUB-TS18 amplifier will turn on, even when the audio-sense feature has been activated by placing the Audio-Sense On/Off Switch ¢ in the AUTO position. The amplifier will remain on for about 10 –15 minutes without a trigger signal.
¢Audio-Sense On/Off Switch: When placed in the AUTO position, and when the Master Power Switch ‚ is turned on, the SUB-TS18 will automatically turn itself on or
SUB-TS18 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS 5