Harman-Kardon HS 150 owner manual Rear Panel Connections, English

Rear Panel Connections

ENGLISH

￿Composite Video Output

￿S-Video Output

￿Component Video Outputs

￿Scart TV Output

￿AC Power Cord

￿FM Antenna

￿Audio In

￿Composite Video Output: Connect this jack to the video input on a television or video projector.

￿S-Video Output: Connect this jack to the S- Video input on a television or video projector.

￿Component Video Outputs: These outputs carry the component video signals for connection to display monitors with component video inputs. For standard analog TV's or projectors with inputs marked Y/Pr/Pb or Y/Cr/Cb, connect these outputs to the corresponding inputs. If you have a high-definition television or projector that is compatible with high scan rate progressive video, connect these jacks to the “HD Component” inputs. Note that if you are using a progressive scan display device, then ”Progressive” must be selected in the Video Set-up Menu in order to take advantage of the progressive scan circuitry. See page 20 for more information on progressive scan video.

IMPORTANT: These jacks should NOT be con- nected to standard composite video inputs.

￿SCART OUT (TV): If your TV has a SCART socket, you can connect a SCART cable to your TV and to your DVD Player for improved video quality. The SCART cable carries both audio and video. You can select Composite Video or RGB video for that SCART connector’s video output signal.

￿Subwoofer Output

￿Coaxial Digital Input

￿Optical Digital Input

￿Analog Audio Outputs

￿Front Speaker Outputs

￿Remote IR Input

￿TV Audio In

￿AC Power Cord: Connect this plug to an AC outlet. If the outlet is controlled by a switch, make certain that it is in the ON position.

￿FM Antenna: Connect to the supplied FM antenna.

￿Audio In: Connect to a line-level analog audio source: TV, tape player, Minidisc, PC, etc.

￿Subwoofer Output: Connect to the SUB/LFE input on the subwoofer.

￿Coaxial Digital Input: Connect the coax digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to these jacks.

￿Optical Digital Input: Connect the optical digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source.

￿Analog Audio Outputs: Connect these jacks to the analog audio input on a TV set or external audio system for analog audio playback or to the RECORD/INPUT jacks of an audio recorder for recording.

￿Coaxial Digital Output

￿Subwoofer Trigger Output

￿USB On-The-Go Input

￿HDMI Output

￿Remote IR Output

￿Front Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right speakers. In conformance with the new CEA color code specification, the White ter- minal is the positive, or "+" terminal that should be connected to the red (+) terminal on Front Left speaker with the older color coding, while the Red terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on Front Right speaker. Connect the black (–) terminals on the HS to the black (–) terminals on the speakers. See page 14 for more information on speaker polarity.

￿Remote IR Input: If the HS 150’s front- panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack.

REAR PANEL CONNECTIONS 9