FRONT-PANEL CONTROLS
CONTROLLER AND AMPLIFIER
The MAS 100 and MAS 110 use
NOTE: Controls are the same for all models.
Power: Turns the MAS 100/MAS 110 on or places it in Standby mode. To completely power off the unit, unplug the power supply.
Message Display: The time and messages are displayed in this
CD Slot: Load compatible discs here.
Skip/Scan Forward/Reverse: These buttons function diffe- rently, depending on the current source:
•iPod, CD or USB: Press and release the Forward Button to skip to the next track. Press the Reverse Button twice to skip to the previous track. Press and hold the Scan Forward/Reverse Buttons to scan forward or reverse within a track.
•Radio: Press and release the Preset +/- Button on the Remote Control or the Skip Forward/Reverse Button on the front panel to select the next/ previous programmed preset station. Press and hold the Skip/Scan Forward/Reverse Button to scan quickly through the stations. When you release the button, the tuner continues to scan until it finds a station of acceptably strong signal quality, and then it stops. To stop the scan before a station is found, press the Forward/Reverse button again.
Play/Pause: Each tap toggles between the Play and Pause functions.
Stop: Fully stops playback.
Eject: When a CD is loaded, tap here to eject it.
USB Port A: Connect a compatible USB device here to enjoy playback of audio MP3 or WMA files. Although most USB flash and
Headphone Jack: Outputs a stereo signal for private listening through most headphones that are equipped with
a 3.5mm plug.
Volume Control: Increases or decreases the volume.
English
Message Display | Skip/Scan Forward/Reverse |
Note: Controls are the same for all models.
Power
CD Slot
USB Port
Play/Pause
Headphone
Eject
Stop
Volume
5