HP 175X, 310X manual DLC/LLC Protocol Information, Error Messages, Error Code and, Description

Status	Indicates the current AppleTalk configuration status.
	● Read the print server is awaiting data.
	● Disabled AppleTalk was manually disabled.
	● Initializing the print server is registering the node address or
	name. An additional status message may also be displayed.
	An error code and message are displayed if the print server is not ready.
Name	The name of the printer on the AppleTalk network. A number n after the name
	indicates that there are multiple devices with this name, and this is the nth
	instance of the name.
Zone	The name of the AppleTalk network zone on which the printer is located.
Type 1:	The type of the printer being advertised on the network. Two types can be
Type 2:	displayed.
Network	The AppleTalk Network Number on which the print server is currently
Number	operating.
Node	The AppleTalk Node Number that the print server chose for itself as part of its
Number	initialization sequence.
	Note: The AppleTalk phase 2 (P2) parameter is preconfigured on the print
	server.
Back to Top

DLC/LLC Protocol Information

Provides the current status and parameter values for the DLC/LLC network protocol.

This section appears only for the 310x.

Message Description

Status Indicates the current DLC/LLC configuration status.

●Ready the print server is awaiting data.

●Disabled DLC/LLC was manually disabled.

●Initializing the print server is registering the node address or name. An additional status message may also be displayed.

An error code and message are displayed if the print server is not ready.

Back to Top

Error Messages

Error Code and	Description
Message
02	During self-test, the print server detected an internal loopback test error.
LAN ERROR-	The print server may be faulty. If the error persists, replace the print
INTERNAL	server.
LOOPBACK