HP 175X, 310X manual Reset or power cycle the print server to enable the new configuration

13	Reset or power cycle the print server to enable the new configuration
NETWORK	values.
RECONFIG- MUST
REBOOT
15	The configuration information for the NetWare functions is not stored
CONFIGURATION	correctly on the print server. Use the installation software, embedded
ERROR	web server, or other tools to reconfigure the print server. If this error
	persists, there may be a problem with the print server.
16	The print server has not been configured for NetWare. Use the
NOT CONFIGURED	installation software, embedded web server, or other tools to configure
	the print server for NetWare networks.
17	The print server was unable to find the NetWare print server (in Remote
UNABLE TO FIND	Printer mode) or file server (in Queue Server mode). There was no
SERVER	response to service queries for advertising print servers or file servers
	that matched the configured print server or file server name.
	Make sure that the print server or file server is running and that the print
	server or file server name configured on the print server matches the
	actual name used by the print server or file server. Also make sure that
	all cables and routers are functioning correctly.
18	The print server detected that the password for the NetWare print server
PASSWORD ERROR	object is wrong. Use a NetWare utility (such as PCONSOLE) to erase
	the password for the print server object. When the print server logs on
	again, it sets a new password.
	Note: When multiple file servers are configured, the error is only
	displayed on the configuration page if none of the file servers are
	connected.
19	The HP Jetdirect print server detected that the print server object has not
NO QUEUE	been assigned any queues to service. Assign queues to the print server
ASSIGNED	object using printer installation or NetWare utilities.
	Note: When multiple file servers are configured, the error is only
	displayed on the configuration page if none of the file servers was
	successfully connected.
1A	A NetWare printer number for this printer has not been configured.
PRINTER NUMBER	Assign a valid printer number to the print server. Use a NetWare utility
NOT DEFINED	(such as PCONSOLE), the Jetdirect embedded web server, or another
	tool to assign a printer number.
1B	The NetWare printer number assigned to the printer is already in use by
PRINTER NUMBER	another printer. Assign an unused printer number. This may also occur
IN USE	when a printer is power cycled, in which case the error goes away after
	the print server times out and detects the lost connection.