HP 175X, 310X manual TFTP Parameter, Description

●Other parameters

●Support parameters

Tables of TFTP parameters:

General parameters for TFTP

TFTP Parameter Description

The IP administrative password (up to 16 case-sensitive alphanumeric characters) that allows

passwd: administrators to control changes of print server configuration parameters through Telnet or embedded web server.

Identifies the physical location of the printer (SNMP sysLocation object). Only printable

sys-location:ASCII characters are allowed. The maximum length is 64 characters. The default location is undefined. (Example: 1st floor, south wall)

ASCII character string (up to 64 characters) that identifies the person who administers or

sys-contact:services the printer (SNMP sysContact object). This may include how to contact this person. The default contact is undefined.

TCP/IP main parameters for TFTP

TFTP Parameter

host-name:

domain-name:

dns-svr: pri-wins-svr: sec-winds-svr:

smpt-svr:

Description

Specifies the node name that will appear on the Jetdirect configuration page. Default is NPIxxxxxx, where xxxxxx is the last six digits of the print server’s hardware address (MAC or LAN address).

The domain name for the device (for example, support.hp.com). It does not include the host name—it is not the Fully Qualified Domain Name (such as printer1.support.hp.com).

IP address of the DNS (Domain Name System) server.

The IP address of the primary Windows Internet Name Service (WINS) server.

The IP address of the secondary Windows Internet Name Service (WINS) server.

The IP address of the outgoing e-mail Simple Mail Transport Protocol (SMTP) server, for use with supported scanning devices.

TCP/IP print option parameters for TFTP

TFTP Parameter			Description
		Enables or disables printing to TCP port 9100 on the print server.
9100-printing:	0		Disables.
	1		(default) Enables.
		Enables or disables the ability to print via FTP:
ftp-printing:	0		Disables.
	1		(default) Enables.
		Enables or disables the ability to print via IPP:
ipp-printing:	0		Disables.
	1		(default) Enables.
		Enables or disables LPD (Line Printer Daemon) printing services on the print server:
lpd-printing:	0		Disables.
	1		(default) Enables.
		A port-specific parameter that specifies printing an LPD banner page:
banner:	0		Disables banner pages.
	1		(default) Enables banner pages.

interlock:

Specifies whether an acknowledgement (ACK) on all TCP packets is required before the printer is allowed to close a Port 9100 print connection.