Settings, Telnet Config parameter ).

HP Web Jetadmin password

Configured on the print server using HP Web Jetadmin and an HP-proprietary SNMP MIB (Management Information Base) object. For instructions, refer to your online help for HP Web Jetadmin.

Examples of Access Control Settings

Settings

Level of Access

 

Control

Embedded web server ,

SNMP v1/v2c, or Telnet enabled

Administrative password not set

SNMP Set Community Name not specified

Host access list empty

Password(s) set: IP administrative password,

HP Web Jetadmin password, SNMP Set Community Name

No encryption

Host access list empty

None.

Any system can access the print server configuration parameters through the embedded web server,

SNMP v1/v2c, or Telnet. No passwords are required.

Best used for a trusted environment.

Low.

Any system can access the print server configuration parameters through the embedded web server,

SNMP v1/v2c, or Telnet, but password(s) protect against unintentional configuration changes.

Best used for a trusted environment.

Page 96
Image 96
HP 310X, 175X manual Examples of Access Control Settings, HP Web Jetadmin password, None, Low