HP 175X, 310X manual For 310x only

SSL/TLS For 310x only.

(Secure Sockets Layer, Transport Layer Security)

Specifies whether IP communication with the print server’s embedded web server is encrypted and secured with an X.509 certificate. A string of the format CN:common-namespecifies the common name (CN) of the digital certificate installed.

●Disabled a digital certificate has not been installed.

Cert Expires

SNMP Versions

SNMP Set

Cmty

Name

For 310x only, specifies the expiration date of the digital certificate for SSL/TLS encrypted security, if it is enabled (see SSL/TLS above). The date is in UTC format, for example: 2002-10-02 12:45 UTC

●Not Applicable SSL/TLS is not enabled, or not supported (on the 175x), so this entry is inapplicable.

Specifies the SNMP versions enabled on the print server.

●Disabled All SNMP versions are disabled on the print server. No SNMP access is allowed.

●1,2 SNMP v.1 and SNMP v.2c are supported, and SNMP v.3 is disabled, or not supported (on the 175x).

●1,2,3-na/npSNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled with the minimum security of no authentication (“na”) and no privacy (“np”) enabled. (Only for 310x.)

●1,2,3-a/npSNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled with the minimum security of authentication enabled (“a”) but no privacy (“np”) enabled. (Only for 310x.)

●1,2,3-a/pSNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled with the minimum security of authentication (“a”) with privacy (“p”) enabled. (Only for 310x.)

●3-na/npSNMP v.1 and v.2c are disabled. SNMP v.3 is enabled with the minimum security of no authentication (“na”) and no privacy (“np”) enabled. (Only for 310x.)

●3-a/npSNMP v.1 and v.2c are disabled. SNMP v.3 is enabled with the minimum security of authentication enabled (“a”) but no privacy (“np”) enabled. (Only for 310x.)

●3-a/pSNMP v.1 and v.2c are disabled. SNMP v.3 is enabled with the minimum security of authentication (“a”) with privacy (“p”) enabled. (Only for 310x.)

Specifies whether an SNMP set community name has been configured on the print server. An SNMP set community name is a password for “write” access to SNMP control functions (SNMP SetRequests) on the print server.

●Not Specified an SNMP set community name has not been set.

●Specified a specific SNMP set community name has been set.

Access Identifies whether a host access control list is configured on the print server. A

List host access control list specifies the IP address of individual systems, or IP network of systems, that are allowed access to the print server and device.

● Not Specified a host access list is not configured on the print server. All systems are allowed access.

●Specified a host access list is configured on the print server.