HP 175X, 310X manual AppleTalk parameters for Telnet, DLC/LLC parameters for Telnet

	Enables or disables IPX toner-low notification using PJL:
ipx-toner-low	0	Disables.
	1	(default) Enables.

AppleTalk parameters for Telnet

Telnet Parameter

at-config

Device Name

Print Type Zone

Phase

Status

Description and Values

Enables or disables AppleTalk (EtherTalk) protocol operation on the print server:

0Disables.

1(default) Enables.

(read-only parameter) The name of the printer on the AppleTalk network. A number n after the name indicates that there are multiple devices with this name, and this is the nth instance of the name.

(read-only parameter) Specifies the AppleTalk network printer type reported by the print server.

(read-only parameter) The name of the AppleTalk network zone on which the printer is located.

(read-only parameter) Indicates whether AppleTalkPhase 2 (P2) is preconfigured on the print server.

(read-only parameter) Indicates the current AppleTalk configuration status. READY Indicates the HP Jetdirect print server is awaiting data. DISABLED Indicates that AppleTalk was manually disabled.

INITIALIZING Indicates that the print server is registering the node address or name. An additional status message may also be displayed

DLC/LLC parameters for Telnet

Telnet Parameter	Description and Values
	Enables or disables DLC/LLC protocol operation on the print server:
dlc/llc-config	0 Disables.

1(default) Enables.

Other parameters for Telnet

Telnet Parameter Description and Values