advanced

general

export

save exit

Enables the advanced Telnet commands in addition to the ones generally available. Help will include the advanced and general commands.

Disables the advanced Telnet commands; only the general ones will be available. Help will exclude the advanced commands.

Exports the Telnet settings to a file for editing and importing via Telent or TFTP. This command is only supported by systems such as UNIX that support input/output redirection.

Saves the Telnet settings and exits the Telnet session.

Exits the Telnet session.

General settings for Telnet

Telnet Parameter

passwd

sys-location

sys-contact

Description and Values

The administrative password (up to 16 alphanumeric characters) for both Telnet and the embedded web server). When initiating the next Telnet session, you will be prompted for a user name and this password.

Enter the password twice for confirmation. For example: passwd jd1234 jd1234 sets the password to “jd1234”.

To clear the password, enter the command without the two password and confirmation entries.

Identifies the physical location of the printer (SNMP sysLocation object). Only printable ASCII characters are allowed. The maximum length is 255 characters.

ASCII character string (up to 255 characters) that identifies the person who administers or services the printer (SNMP sysContact object). This may include how to contact this person.

TCP/IP main parameters for Telnet

Telnet Parameter

 

Description and Values

 

 

 

Specifies the node name (up to 32 alphanumeric characters) that will appear on the Jetdirect

host-nameconfiguration page. Default is NPIxxxxxx, where xxxxxx is the last six digits of the print server’s hardware address (MAC or LAN address).

Page 57
Image 57
HP 175X, 310X manual General settings for Telnet, TCP/IP main parameters for Telnet