HP 175X, 310X manual Resetting the print server to factory defaults cold reset

Resetting the print server to factory defaults (cold reset)

The factory-default reset procedure (described below) is sometimes called a “cold reset” or a “cold boot”. When done, the print server responds exactly like it was fresh from the factory. To reset the print server configuration to factory defaults, follow these steps:

1.Unplug the power module from the back of the print server.

2.While holding down the test button on the rear of the print server, plug the power module back into the print server and continue to hold down the test button for about five seconds. Any user-configured settings will be erased.

©2000, 2001 Hewlett-Packard Company