HP 310X, 175X manual Tftp configuration file parameters

TFTP configuration file

To provide additional configuration parameters for your HP Jetdirect print server, such as SNMP (Simple Network Management Protocol) or non-default settings, an additional configuration file can be downloaded using TFTP. This TFTP configuration file’s relative path name is specified in the BOOTP reply using the vendor-specific tag “T144” or the standard BOOTP tag “ef” in the /etc/bootptab file.

Example of a TFTP configuration file. Lines starting with “#” are remarks not included in the file.

#

#Example of an HP Jetdirect TFTP Configuration File

#Allow only Subnet 192.168.10 access to peripheral.

#Up to 10 "allow" entries can be written via TFTP.

#Up to 10 "allow" entries can be written via Telnet or embedded web server.

#"allow" may include single IP addresses.

#

allow: 192.168.10.0 255.255.255.0

#

#

#Disable Telnet.

telnet: 0

#Enable the embedded web server.

ews-config: 1

#Detect SNMP unauthorized usage.

authentication-trap: on

#Send Traps to 192.168.10.1.

#

trap-dest: 192.168.10.1

#

#

#Specify the Set Community Name.

set-community-name: 1homer2

#End of file

TFTP configuration file parameters

The following types of TFTP parameters are listed and described in tables below. You can click on a category below, to jump to the list.

●General parameters

●TCP/IP: main parameters

●TCP/IP: print option parameters

●TCP/IP: raw print port parameters

●TCP/IP: access control parameters

●TCP/IP: other parameters

●SNMP parameters

●IPX/SPX parameters

●AppleTalk parameters

●DLC/LLC parameters