![](/images/new-backgrounds/1330581/330581251x1.webp)
1C | The file server does not have a print server object that corresponds to |
PRINT SERVER | the specified NetWare node name. Use printer installation software, a |
NO DEFINED | NetWare utility (such as PCONSOLE), or another tool to create the |
| print server object. |
| Note: When the print server is configured for multiple file servers, the |
| error is only displayed on the configuration page if none of the file |
| servers was successfully connected. |
1D | Remote Printer mode error. The print server was unable to establish an |
UNABLE TO | SPX connection with the NetWare print server. Make sure that the |
CONNECT TO | NetWare print server is running and that all cables and routers are |
SERVER | functioning correctly. |
1E | The SPX connection to the print server was lost when the print server |
FAIL RESERVING | attempted to reserve the printer number. This indicates a possible |
PRINTER NUM | network problem, or a problem with the print server. Make sure all |
| cables and routers are functioning correctly. Try restarting the print |
| server. |
1F | A failure was detected when selecting the buffer size to be used when |
ERR | reading print data from the file server. This may indicate a network |
NEGOTIATING | problem. |
BUFFER SIZE | Note: When the print server is configured for multiple file servers, the |
| |
| error is only displayed on the configuration page if none of the file |
| servers was successfully connected. |
20 | A failure was detected when the print server tried to log onto the file |
UNABLE TO | server. This could be caused by the print server object not existing on |
LOGIN | the file server, or by a security check that prevents the print server from |
| logging in. Make sure the file server name and print server object name |
| are correct. Use PCONSOLE to erase the password for the print server |
| object. Create a new print server object. |
| Note: When the print server is configured for multiple file servers, the |
| error is only displayed on the configuration page if none of the file |
| servers was successfully connected. |
21 | A failure was detected when the print server tried to set the password |
UNABLE TO SET | for the print server object. (Whenever the print server is able to log in |
PASSWORD | without a password, it sets the password automatically.) This indicates a |
| networking or security problem. Create a new print server object. |
| Note: When the print server is configured for multiple file servers, the |
| error is only displayed on the configuration page if none of the file |
| servers was successfully connected. |
22 | Queue Server mode error. The print server could not establish an NCP |
UNABLE TO | connection to the file server. Make sure that the correct file servers are |
CONNECT TO | connected. |
SERVER | Note: When the print server is configured for multiple file servers, the |
| |
| error is only displayed on the configuration page if none of the file |
| servers was successfully connected. |