Back to Top

Network Statistics

Provides the current values for various network parameters monitored by the print server.

Message

Description

Total

Total number of frames (packets) received by the print server without error.

Packets

This includes broadcast, multicast packets, and packets specifically

Received

addressed to the print server. This number does not include packets

 

specifically addressed to other nodes.

Unicast

Number of frames specifically addressed to this print server. This does not

Packets

include broadcasts or multicasts.

Received

 

Bad Packets

Total number of frames (packets) received with errors by the print server.

Received

 

Framing

Maximum of CRC (Cyclic Redundancy Check) errors and framing errors.

Errors

CRC errors are frames received with CRC errors. Framing errors are frames

Received

received with alignment errors. A large number of framing errors could

 

indicate a cabling problem with your network.

Total

Total number of frames (packets) transmitted without error.

Packets

 

Transmitted

 

Unsendable

Total number of frames (packets) not successfully transmitted because of

Packets

errors.

Transmit

Number of frames not transmitted because of repeated collisions.

Collisions

 

Transmit

Total number of frames not transmitted because a late collision occurred. A

Late

large number may indicate a cabling problem on the network.

Collisions

 

Back to Top

TCP/IP Protocol Information

Provides the current status and parameter values for the TCP/IP network protocols.

Message

Description

Status

Current TCP status:

Ready the print server is awaiting data over TCP/IP.

Disabled TCP/IP was manually disabled.

Initializing the print server is searching for the BOOTP server, or trying to get the configuration file through TFTP. An additional status message may also be displayed.

An error code and message are displayed if the print server is not ready.

Page 118
Image 118
HP 310X, 175X manual Network Statistics