HP 310X, 175X manual IPX/SPX parameters for Telnet

SNMP trap destination list must have a trap daemon to listen to those traps.

IPX/SPX parameters for Telnet

Telnet Parameter

ipx-config

ipx-unitname

Address

ipx-frametype

ipx-sapinterval

ipx-nds-tree

ipx-nds-context

ipx-job-poll

ipx-banner

ipx-eoj

Description and Values

Enables or disables IPX/SPX protocol operation on the print server:

0Disables.

1(default) Eenables.

A user-assigned alphanumeric name assigned to the print server (31 characters maximum). By default, the name will be NPIxxxxxx, where xxxxxx are the last six digits of the hardware address (MAC or LAN address).

(read-only parameter) Identifies the IPX network and node numbers detected on the network, in the form NNNNNNN:hhhhhhhh (hexadecimal), where NNNNNNNN is the network number and

hhhhhhhhis the hardware address (MAC or LAN address) of the print server.

Specifies the IPX frame type setting, one of the following: AUTO (default), EN_SNAP,

EN_8022, EN_8023, EN_II, TR_8022, TR_SNAP.

Specifies the time interval (1–3600 seconds) that the print server waits between Service Advertising Protocol (SAP) broadcasts on the network. The default is 60 seconds. 0 disables SAP broadcasts.

An alphanumeric string, up to 31 characters, that specifies the name of the Novell Directory Services (NDS) tree for this print server.

An alphanumeric string, up to 256 characters, that specifies the NDS context for the print server.

Specifies the time interval (1–255 seconds) that the print server will wait to check for print jobs in a print queue. The default is 2 seconds.

Enables or disables printing an IPX banner page using the Printer Job Language (PJL):

0Disables.

1(default) Enables.

Enables or disables IPX end-of-job notification using PJL:

0Disables.

1(default) Enables.