HP 175X, 310X manual appletalk, Disables, TFTP ParameterDescription

TFTP Parameter	Description
	Enables or disables AppleTalk (EtherTalk) protocol operation on the print server:
appletalk:	0 Disables.

1(default) Enables.

DLC/LLC parameters for TFTP [not for 175x]

TFTP Parameter

[not for 175x]

dlc/llc:

Description

Enables or disables DLC/LLC protocol operation on the print server:

0Disables.

1(default) Enables.

Other parameters for TFTP

TFTP ParameterDescription

Enables or disables the web scanning feature in the embedded web server, when connected to a supported device:

scan-config:

0 Disables.

1 (default) Enables.

scan-idle-timeout:

scan-email-config:

MFP-config:

Specifies the number of seconds (1–3600) that an idle scan connection is allowed to remain open. 0 disables the timeout. The default is 300 seconds.

Enables or disables the scan-to-email feature in the embedded web server, when connected to a supported device:

0Disables.

1(default) Enables.

Enables or disables print server support of the client software provided with your multifunction peripheral (MFP) or All-In-One:

0(default) Disables (allows printing only).

1Enables (allows printing, scanning, etc.).

usb-mode:Specifies the communication mode over the USB port on the print server:

Auto (default) Automatically negotiates and sets the the highest communication mode possible for the attached printer or device.

MLC (Multiple Logical Channels) An HP-proprietary communication mode that allows multiple channels of simultaneous print, scan, and status communications.

BIDIR A standard connection that supports bi-directional communications between the printer and print server. The print server sends print data and receives status from the printer.

UNIDIR A standard connection in which data is transferred in one direction only (to the printer).

usb-statpg-lang:Specifies the page description language (PDL) used by the print server to send the Jetdirect configuration page to the printer:

Auto (default) The language is auto-detected when the print server is powered on or after a cold reset to factory defaults.

PCL Hewlett-Packard Printer Control Language

ASCII Standard ASCII characters

HPGL2 Hewlett-Packard Graphics Language (v2)

PS Adobe PostScript language

Support parameters for TFTP