HP 310X IPX/SPX Protocol Information, Server Syslog Server Idle Timeout Web Jetadmin URL, Message

BOOTP/DHCP Server

TFTP

Server

Config

File

Domain

Name

DNS Server

WINS

Server

Syslog

Server

Idle

Timeout

Web

Jetadmin

URL

Back to Top

Displayed during initialization while the print server attempts to obtain its TCP/IP configuration from a BOOTP or DHCP server. The temporary address displayed is 0.0.0.0.

●Not Specified the configuration server’s IP address could not be determined or was set to zero in the response packet.

The IP address of the system where the TFTP configuration file is located. During initialization, the temporary address 0.0.0.0 is displayed.

●Not Specified a TFTP server has not been not been set.

The name of the print server’s configuration file. The file pathname may be truncated to fit on rest of the one line allocated.

●Not Specified a file was not specified in the BOOTP reply from the host.

The Domain Name System (DNS) name of the domain in which the print server resides (for example, support.company.com). It is not the fully qualified DNS name because the host printer name is not included (for example: printer1.support.company.com).

●Not Specified a domain name has not been configured on the print server.

The IP address of the Domain Name System (DNS) server.

●Not Specified a DNS server’s IP address has not been configured on the print server.

The IP address of the Windows Internet Name Service (WINS) server.

●Not Specified a WINS server’s IP address has not been configured on the print server.

The IP address of the syslog server configured on the print server.

●Not Specified a syslog server has not been configured.

The timeout value expressed in seconds after which the print server closes an idle TCP print data connection. Acceptable values are integers between 0 and 3600 seconds. A value of zero turns off the timeout mechanism. The default value is 270 seconds.

If the print server is found on the network by HP Web Jetadmin, the URL of the host system used for HP Web Jetadmin services is displayed. The URL is limited to two lines and may be truncated.

●Not Specified the URL of the HP Web Jetadmin host system could not be identified or is not configured.

IPX/SPX Protocol Information

Provides the current status and parameter values for the IPX/SPX network protocols.

Message Description