HP 175X, 310X manual Configuration page does not print, or is unreadable

Configuration page does not print, or is unreadable.

for HP Jetdirect 175x external print server/Internet connector for USB and HP Jetdirect 310x external print server/Internet connector for

USB

If the configuration page does not print successfully, try the steps below. If the page prints but is unreadable, note step 4 particularly.

1.Make sure your printer is connected to your print server by a USB A-to-B cable. (This is the standard USB cable.)

to print server to printer

Note that the print server does not support parallel-to-USB converters (for connecting a parallel printer to a USB host) -- it works with USB printers only. Make sure that the cable is connected firmly to both the printer and the print server.

2.Make sure that the printer and the print server are powered on.

3.Make sure that the printer is Online or Ready.

4.Make sure that the printer supports one of these printer languages:

❍ASCII

❍PCL

❍PostScript

❍HP/GL-2

The print server can print a configuration page in any of these languages. By default, the print server is configured to