HP 175X, 310X manual Configuration page does not print or is unreadable

Configuration page does not print,

or is unreadable

for HP Jetdirect 175x external print server/Internet connector for

USB and HP Jetdirect 310x external print server/Internet connector for

USB

If the configuration page does not print, try these steps.

If the configuration page prints but is unreadable, skip to step 4.

1.Make sure your printer is connected to your print server by a USB A-to-B cable. (This is the standard USB cable.)

to print server to printer

Note that the Jetdirect print server does not support parallel-to-USB converters (for connecting a parallel printer to a USB host) -- it works with USB printers only. Make sure that the cable is connected firmly to both the printer and the print server. Fully inserting the plug takes more force than most USB connections.

2.Make sure that the printer and the print server are powered on.

3.Make sure that the printer is Online or Ready.

4.You can check whether the print server is sending the page in a printer language (PDL) that the printer supports. If the language is not supported by the printer, the page will not