HP 310X, 175X manual Resetting print server to factory defaults cold reset, configuration

Resetting print server to factory defaults (cold reset)

for HP Jetdirect 175x external print server/Internet connector for

USB and HP Jetdirect 310x external print server/Internet connector for

USB

Once you configure the HP print server, the configuration settings are retained in memory unless you manually reset them to factory defaults.

To reset the print server configuration to factory defaults, follow these steps:

1.Unplug the power module from the back of the print server.

2.While holding down the test button on the back of the print server, plug the power module back into the print

server and continue to hold down the test button button for about five seconds. Any user-configured settings will be erased.

When the procedure is done, the print server responds exactly like it was fresh from the factory. See a description of this default

configuration.

©2000, 2001 Hewlett-Packard Company