HP 175X, 310X manual Steps to install the print server hardware

Steps to install the print server hardware

1.Attach the print server to a 10Base-T (Ethernet) or 100Base-TX (Fast Ethernet) local area network by plugging a network cable into the RJ-45 connector on the rear end of the print server.

2.Attach the print server to the printer by plugging the Universal Serial Bus (USB) cable—shipped with the print server—into the USB connector on the front end of the print server and into the USB connector on the printer.

❍Caution! Unsupported USB Devices:

■HP 4135A Jetdirect Connectivity Card

■any USB hub