HP 310X, 175X manual TCP/IP diagnostics parameters for Telnet, Snmp parameters for Telnet

cold-reset

ews-config

tcp-mss

tcp-msl

Sets TCP/IP factory defaults. After a cold reset, power cycle the print server. Parameters for other subsystems, such as IPX/SPX or AppleTalk, are not affected.

Enables or disables the print server’s embedded web server to view or change configuration values:

0Disables.

1(default) Enables.

Specifies the maximum segment size (MSS) that the print server will advertise for use when communicating with local subnets (Ethernet MSS=1460 bytes or more) or remote subnets (MSS=536 bytes):

0(default) All networks are assumed to be local (Ethernet MSS=1460 bytes or more).

1Use MSS=1460 bytes (or more) for subnets, and MSS=536 bytes for remote networks.

2All networks are assumed to be remote (MSS=536 bytes), except the local subnet. MSS affects performance by helping to prevent IP fragmentation that may result in data retransmission.

Specifies the maximum segment life (MSL) in seconds. The range is 5–120seconds. The default is 15 seconds.

TCP/IP diagnostics parameters for Telnet

Telnet Parameter Description and Values

Last Config IP

TCP Conns

Refused

TCP Access

Denied

DHCP Lease Time

DHCP Renew Time

DHCP Rebind Time

(read-only parameter) The IP address of the system from which the print server's IP address was configured.

(read-only parameter) The number of client TCP connections that are refused by the print server.

(read-only parameter) The number of times that client systems were denied access to the print server because there was no allowable entry in the print server's host access list.

(read-only parameter) The DHCP IP Address lease duration time in seconds.

(read-only parameter) The DHCP T1 timeout, specifying the DHCP lease renewal time in seconds.

(read-only parameter) The DHCP T2 timeout, specifying the DHCP lease rebind time in seconds.

SNMP parameters for Telnet