
Is the Power/Status light ON solid green?
for HP Jetdirect 175x external print server/Internet connector for USB and HP Jetdirect 310x external print server/Internet connector for
power/status light
USB
power receptacle
Check the power/status light on your print server. It should be ON solid green (bright green in color and glowing continuously, not blinking). If it is not ON solid green, please follow the troubleshooting steps below.
For all of the steps below, note that when you first apply power to a
normally operating print server, the power/status light will slowly blink green for several seconds during
1.Check that the Jetdirect power module is plugged into a suitable power source (typically a wall outlet), and that the power connector is plugged into the print server.
Note: The power module shown below is the North American version. The plug pattern may be different in other regions of the world.