![](/images/new-backgrounds/1330581/330581257x1.webp)
3A | The NDS tree cannot be located. The message may occur when the file |
UND ERR: | server is not running or when a network communications problem |
UNABLE TO FIND | exists. |
TREE |
|
3B | The print server cannot change the NDS connection state. Check |
NDS CONNECTION | licenses on the spooling server. |
STATE ERROR |
|
3C | The print queue object cannot be located in the specified NDS context. |
NDS ERR: |
|
UNRESOLVED |
|
QUEUE |
|
3D | Cannot locate the file server on the network. The server may not be |
NDS ERR: | running at this time or a communications problem may exist. |
CANNOT READ Q |
|
HOST |
|
3E | Print Server Object Name mismatch. Unable to read the print server’s |
NDS PRNT SRVR | public key. Verify object names. Verify that the object key assigned to |
PUBLIC KEY ERR | the print server is a print server object and not a printer or other object. |
3F | The NDS server address cannot be located or accessed. |
UNABLE TO GET |
|
NDS SRVR ADDR |
|
40 | The ARP layer has detected another node on the network using the |
ARP DUPLICATE | same IP address as the print server. Extended error information below |
IP ADDRESS | this message shows the hardware address of the other node. |
41 | The print server cannot read the contents of its NOVRAM. Cycle power |
NOVRAM ERROR | on the print server by unplugging is power cable and plugging it back |
| in. If the problem persists, perform a cold reset on the print server |
| (while holding down the test button on the back of the print server, |
| plug the power module back into the print server and continue to hold |
| down the test button for about five seconds. Any |
| settings will be erased.) If the problem still persists, call HP technical |
| support for help. |
42 | The IP address specified for the print server (through BOOTP) is an |
INVALID IP | invalid IP address for specifying a single node. Check your Bootptab |
ADDRESS | file for proper entries. |
43 | The IP subnet mask specified for the print server (through BOOTP) is |
INVALID SUBNET | an invalid subnet mask. Check your Bootptab file for proper entries. |
MASK |
|
44 | The default gateway IP address specified for the print server (through |
INVALID | BOOTP) is an invalid IP address for specifying a single node. Check |
GATEWAY | your Bootptab file for proper entries. |
ADDRESS |
|
45 | The syslog server IP address specified for the print server (through |
INVALID SYSLOG | BOOTP) is an invalid IP address for specifying a single node. Check |
ADDRESS | your Bootptab file for proper entries. |