❍Network Statistics
❍Protocol Info
❍Configuration Page
❍Refresh Rate
Configuration:
●Network Settings
●Support Info
●USB Settings
●Other Settings
Network Settings
●TCP/IP tab
●IPX/SPX tab
●AppleTalk tab
●DLC/LLC tab
●SNMP tab
Click on the Networking tab at the top of the web page. (Make sure that beneath Configuration in the left column of the page, Network Settings is selected.) The Network Settings pages allow you to set or change configuration parameters for
TCP/IP, IPX/SPX, AppleTalk, and SNMP protocols. To assign a parameter setting, enter the desired value and click [Apply].
Notes
●If you enter or change a configuration parameter value, click [Apply] to enable your change, or click [Cancel] to erase your change.
●Changes to the IP address will close the connection to the embedded web server. To
TCP/IP settings
Click on the Networking tab. If the TCP/IP tab is not highlighted, then beneath Configuration in the left column of the page, select Network Settings, and then select the TCP/IP tab in the second row of tabs across the page. To assign a parameter setting, enter the desired value and click [Apply].
