Harmar Mobility AL030, AL010 manual Hitch Post, Optional Class, Unpacking the Lift

Section 1 - Unpacking the Lift

Your Universal Outside Lift was factory pre-assembled to require little assembly before installation.

Box contents should include:

HITCH POST	CLASS 2
AL010 - Micro Scooter Lift
	Hitch Adapter

LIFT BODY

HARDWARE PACK

OR

OPTIONAL

CLASS 3

"PLATFORM KEEPER"

LIFT

WELDED
PLATFORM
	TO

AL030 - Manual Wheelchair Lift

HITCH POST

HITCH ADAPTER

and Stabilizer

LIFT BODY

HARDWARE PACK

NOTE: The Platform will not be allowed to unfold until the platform has been lowered at least 1 inch.

OPTIONAL	OPTIONAL
CLASS 2	CLASS 3
OR	OR

Each AL010 is packaged standard with a standard Class 2 hitch adapter. Each AL030 is packaged with a standard Class 1 flat bar style hitch adapter and stabilizer. If a Class 2 or Class 3 hitch adapter or Swing Away option is required, separate parts must be ordered. See Section 5 for installing a lift with the Swing Away option in this manual.

Be sure and check the contents of the box against the package check list to be sure that all parts are included with the lift that are required for proper installation. If any parts are missing or if any damage is noted, immediately contact the distributor from which you purchased your lift. DO NOT attempt to install or use the lift with any missing or damaged parts.