Not For Resale – Free Download at
•Film tip out or film fully spooled back into the cassette when rewinding the film (see 'Film loading' section for access details).
Access the menu by pushing the MODE button for 1s. Select the required function by repeated pushing of the MODE button and make the changes by using the ▲ or
▼buttons. Confirm the selected value (or operational mode) by:
•Pushing the release button halfway
•Pushing the MODE button (not for all settings)
•Waiting for 5 seconds
Confirmation using the MODE button accesses the next item on the menu, as well as making a new setting.
Detailed instructions for respective type of settings is provided under the respective function headings further on in this manual.
All set parameters except for
Film
Film speed (ISO) setting
If you want to expose the film at the recommended speed (ISO/ASA/DIN) and the film has a DX barcode on it (a large pattern consisting of exposed metal sur- faces) then set the shooting mode selector to S. Press the MODE button on the camLCD for 1s. Press repeatedly until ISO appears on the top left of the display. Select Auto DX by pressing the ▲ / ▼ buttons. Confirm by pushing MODE again or by pushing the release button halfway. A DX symbol is shown on the display and the corresponding ISO rating is indicated after loading the film.
If there is no DX barcode on the cassette or you want to alter the recommended ISO rating of the film, set the film speed manually before loading the cassette into the camera. Do this by entering the film speed programming mode as described for DX setting. Set to the required value and confirm the setting. The film speed can be set at 1/3 intervals from IS0 25 through 3200 and the selection will be visible on the camLCD. Proceed to load the camera as described below.
15