Hasselblad XPan II Film plane index, Self Timer, Multi exposure, 4.Press the shutter release button, When delay time is set to 10s, the, To select multi exposure mode push the

Not For Resale – Free Download at http://www.joe-chan.com/manuals

Film plane index

The film plane index is situated on the top plate of the camera to the left of the flash hot shoe. This provides the most accurate mark for distance measurement from the subject.

Self Timer

1.Set the main selector dial to the icon as in the il- lustration.

2.The icon and set delay time appears in the camLCD panel.

3.Set delay time can be changed (2s or 10s) with the up/down buttons on the camLCD panel.

4.Press the shutter release button.

5.When delay time is set to 10s, the self-timer lamp, located on the front of the camera to the right of the viewfinder window, lights up for seven seconds and flashes for three seconds as a countdown indi- cation. When delay time is set to 2s the self-timer lamp start flashing immediately after release.

6.The shutter will then fire and the film will advance.

Even if the self-timer operation has started, you can stop it simply by turning the mode switch back to S, C or OFF.

When set in the automatic mode, do not stand in front of the camera when pressing the release button as this could adversely affect the exposure reading.

The exposure reading is fixed at the time of pressing the shutter release button, even in AE mode. Check, therefore, to see that there has been no change in the lighting conditions during the delay time before exposure.

Multi exposure

The camera can be programmed to make up to 9 exposures of the same frame.

1.To select multi exposure mode push the MODE button on the camLCD for 1s. Push repeatedly until a flashing double frame symbol appears on the display.

2.Select multi exposure with the ▲ / ▼ buttons to select a non-flashing double frame symbol. Confirm the setting by pushing the release button halfway and a double frame symbol is shown on the camLCD.

3.By pushing the ▲ button repeatedly you can now select up to 9 exposures, displayed on the expLCD. You can any time cancel the multi exposure function by pushing the MODE button. Multi exposure cannot be combined with Auto-bracketing.