Not For Resale – Free Download at
new. Please discard used batteries in an environmentally | tings and a battery icon, see fig. 9 for example. When | |||||
correct way. |
|
|
|
| loaded with film, however, the expLCD will also display | |
|
|
|
|
| a figure that shows the number of unexposed frames | |
Battery check |
|
| ░7░ |
| left on the film (fig. 10). | |
Set the shooting mode selector | to S, C or ). The | When the shutter release button is pressed halfway | ||||
camLCD will indicate the battery status by the following | down, the ISO symbol disappears and a TV symbol ap- | |||||
icons: |
|
|
|
| pears (time value) together with the selected shutter | |
• The battery capacity is adequate. |
|
|
|
| speed (fig.ll). After ten seconds of no response, the | |
• The batteries are low. The camera will function but | ISO symbol appears again, replacing the TV symbol. The | |||||
replace batteries soon. |
|
|
|
| viewLCD display will show selected shutter speed and | |
• Flashing battery icon. The batteries are exhausted and the | ||||||
camera will not function. |
|
|
|
| exposure information. | |
The battery check icon is always visible when the cam- | OFF | |||||
era is in active mode. Check battery status regularly. | ||||||
1. Set the shooting mode selector to OFF | ||||||
|
|
|
|
| ||
Power |
|
|
| 2. All indications on all three LCD's disappear. | ||
| ░8, 9, 10, 11░ |
ON
Set the shooting mode selector to S, C or ).
S- single exposure mode
C- continuous exposure mode - self-timer mode
Without film in the camera, the camLCD will display an ISO symbol, the manually set ISO rating (or '100' in the case of an automatic DX setting), other camera set
POWER SAVE
After three minutes of no response from the camera controls, all indications on the LCDs will disappear and the camera switches over to
The camera will reactivate when:
•the shooting mode selector is moved from OFF to S, C or .
•the shutter release button is pressed halfway down
9