IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT! Read the following important safety instructions to avoid personal injury or death, and to avoid damage to the equipment or property.
WARNINGS
Plug unit into a properly grounded electrical outlet of the correct voltage, size, and plug configuration. If the plug and receptacle do not match, contact a qualified electrician to determine the proper voltage and size, and install the proper electrical outlet.
To avoid any injury, turn the power switch off at the fuse disconnect switch/circuit breaker or unplug the unit from the power source and allow to cool completely before performing any maintenance or cleaning.
For safe and proper operation, the unit must be located at a reasonable distance from combustible walls and materials. If safe distances are not maintained, discoloration or combustion
could occur.
Only light bulbs which meet or exceed N.S.F. standards, specifically designed for food holding areas must be used. Breakage of light bulbs not specially coated could result in personal injury and/or food contamination.
To prevent any injury, discontinue use if power cord is frayed or worn.
If service is required on this unit, contact your
Authorized Hatco Service Agent, or contact the Hatco Service Department at
or International fax
This product has no “user” serviceable parts. To avoid damage to the unit or injury
to personnel, use only Authorized Hatco Service Agents and Genuine Hatco Parts when service is required.
Genuine Hatco Replacement Parts are specified to operate safely in the environments in which they are used. Some aftermarket or generic replacement parts do not have the characteristics that will allow them to operate safely in Hatco equipment. It is essential to use Hatco Replacement Parts when repairing Hatco equipment. Failure to use Hatco Replacement Parts may subject operators of the equipment to hazardous electrical voltage, resulting in electrical shock or burn.
CAUTIONS
Locate the unit at the proper counter height,
in an area that is convenient for use. The location should be level to prevent the unit or its contents from accidentally falling, and strong enough
to support the weight of the unit and food displayed.
Some exterior surfaces on the unit will get hot. Use caution when touching these areas to avoid injury.
Unit is not weatherproof. For safe and proper operation locate the unit indoors where the ambient air temperature is a minimum of 70°F (21°C).
To prevent injury or damage the unit must be transported in the upright position. If laid on its side, all glass surfaces must be secured with tape.
CAUTIONS
Use only
1 | Form No. |