MAINTENANCE

6.After cleaning, drain all expended solution from the unit through the sump drain.

7.Thoroughly wash heater tank with fresh water for several minutes until discharge is clear and all deliming solution has been removed and rinsed.

8.Close sump drain by moving handle all of the way forward until it stops.

9.Follow normal operation instructions.

CAUTION

Do not turn the electrical current to the unit on until the holding vessel has been filled with water or element burnout may occur.

WARNING

If service is required on this unit, contact your Authorized Hatco Service Agent, or contact the Hatco Service Department at 800-558-0607 or 414-671-6350; fax 800-690-2966 or international fax 414-671-3976.

WARNING

This product has no “user” serviceable parts. To avoid damage to the unit or injury

to personnel, use only Authorized Hatco Service Agents and Genuine Hatco Parts when service is required.

WARNING

Genuine Hatco Replacement Parts are specified to operate safely in the environments

in which they are used. Some aftermarket or generic replacement parts do not have the characteristics that will allow them to operate safely in Hatco equipment. It

is essential to use Hatco Replacement Parts when repairing Hatco equipment. Failure

to use Hatco Replacement Parts may subject operators of the equipment to hazardous electrical voltage, resulting in electrical shock or burn.

11

Form No. FR2M-0604

Page 13
Image 13
Hatco FR2 Series manual Maintenance