Hatco FR2 Series manual Model Descriptions, ALL Models, FR2 Models

MODEL DESCRIPTIONS

ALL MODELS

The Hydro-Heater mounts easily to the underside of a holding vessel, leaving the entire vessel area free. Units are shipped ready to install

with all gaskets and fittings. Hydro-Heaters include a stainless steel front, powder coated body, a low- water cut-off system and a convenient drain outlet.

FR2 MODELS

The Hatco FR2 model heaters are designed to be used with a Bain-Marie or Food Rethermalizer to heat or hold foods

at temperatures between 140ºF (60ºC) and 190ºF (88ºC). The desired holding temperature

is maintained by a special electronic controller and “free flow”technology.

UNITS WITH BUILT-IN TEMPERATURE CONTROL

Units with built-in electronic temperature controller and display are excellent for installations where the unit is easily accessible and viewing

is not obstructed.

UNITS WITH REMOTE TEMPERATURE CONTROL

Units supplied with remote electronic temperature controller and display allow for easy operator monitoring and temperature control.

Figure 1. Hydro-Heater

with Built-In Temperature Controller

Figure 2. Hydro-Heater

with Remote Electronic Controller

Form No. FR2M-0604 2