Hauppauge WinTV HVR-1800 N, N

Digital QAM and Analog TV. You cannot chose both Digital ATSC and Digital QAM.

Note: If you’d like to use the A/V inputs, please see instructions below

in External audio/video sources.

If your TV source is ATSC digital over-the-air TV

Select Digital ATSCand click Next. In the ATSC Setup menu, click Next. You

will see the Digital ATSC

Scanscanning for digital

over-the-air channels.

The digital TV scanning

process will scan from chan-

nels 2 to 51. As TV chan-

nels are found, they will

appear in the Channel box.

When complete, click Next/

Note: if you do not

receive any ATSC

digital TV channels, an

antenna signal booster might be needed. After adding a signal booster,

see below for instructions on rescanning and the Troubleshooting section

for information on choosing an antenna.

If your TV source is Clear QAM Digital Cable TV

Clear QAM digital cable TV

channels are those TV chan-

nels broadcast on a digital

cable network which are unen-

crypted (‘free to view’). If you

are using cable TV with clear

QAM programs, chose Digital

QAM channels which are

detected but are encrypted

are automatically not selected.

The resulting channels in the

page 3