7.3.3 GVRP
GVRP ( R l)
VRP allows automatic VLAN configuration between the switch and corresponding nodes. For
xample, if the switch is connected to a device with GVRP enabled, you can activate this setting
to allow dynamic VLAN configuration information to be processed by the switch. If a device
sends a GVRP request using the VID of a VLAN defined on the switch, the switch will
automatically add that device to the existing VLAN.
From this page, you can enable/disable the GVRP (GARP VLAN Registration Protocol) support.
1. Select <Edit>.
2. Press Spacebar to choose enable/disable.
3. Press Ctrl + A to go back to the action menu.
4. Select <Save> to save configured values.
Note: GVRP must also be enabled on participating network nodes.
GA P[Generic Attribute Registration Protocol] VLAN R egistration Protoco
G
e
108 108