7.2.4.2 Broadcast StormFiltering
.PressSpacebar to choose the threshold value.
he valid threshold values are 5%, 10%, 15%, 20%, 25% and NO. The default value is 5%.
7.2.4.3 Max Bridge Transmit Delay Bound
1. Max bridge transmit delay bound: Limits the queuing time of the packets in the switch. If
enabled, the queued packets that exceed the limit will be dropped. Press Spacebar to set the
time. The valid values are 1sec, 2sec, 4sec and “Off”. The default setting is “Off”.
2. Low Queue Delay Bound: Limits the queuing time of the low priority packets in the switch.
If enabled, the low priority packets that exceed the “Low Queue Max Delay Time” will be
sent. Press Spacebar to enable or disable this function. The default setting is “Disabled”.
3. Low Queue Max Delay Time: Allows you to set the time that low priority packets can
queue in the switch. The valid range is 1-255ms. The default “Max Delay Time” is 255ms.
This page will allow you to configure broadcast storm control.
1. Press <Edit> to configure the broadcast storm filter mode.
2
T
78