5.2 Port Status This page provides a display of the current status of every port on the switch. Thestatus depends
on the user settings and the negotiation results.
1. State: Displays port status: either disabled or enabled. “Unlink” will be treated as “off ”.
2. Link Status: “Down” indicates that the port is not linked, “Up” indicates that the port is
linked. (In the figure above, refer to the “Link” column for “PORT6”.)
3. [Auto]-Negotiation: Displays the auto-negotiation mode: auto/force/n-way force.
4. Speed [Status]: Displays “1000”, “100”, or “10” as corresponding to the speed. Ports 1- 24
are 10/100Mbps; ports 25-26 are 10/100/1000Mbps.
5. Duplex [Status]: Displays full-duplex or half-duplex mode.
6. Flow Control: “Full”: Displays whether flow control is enabled in full-duplex mode.
“Half”: Displays whether back pressure is enabled in half-duplex mode.
17