5.4.4 Port Controls
User may modify or change mode operation in this page.
1. State: You can enable or disable the port control for each port.
2. Auto Negotiation: You can set the auto negotiation mode to Auto, N-way (specify the
speed/duplex on a specific port and enable auto-negotiation), or Force for each port.
3. Speed: You can set the speed at 100Mbps or 10Mbps for Ports 1-24. You can set the speed
at 1000Mbps, 100Mbps or 10Mbps for Ports 25& 26 (depending on the module card mode).
4. Duplex: You can set each port to either full-duplex or half-duplex mode.
5. Flow control:
Full: You can enable or disable the flow control function in full-duplex mode.
Half: You can enable or disable the backpressure function in half-duplex mode.
26