4.3.1 Configure the Profile (Add/Edit a Profile)
System Configuration
Parameter | Description |
Profile Name | Define a recognizable profile name for you to identify the different |
| networks. |
SSID | The SSID (up to 32 printable ASCII characters) is the unique |
| name identified in a WLAN. The ID prevents the unintentional |
| merging of two |
| You may specify a SSID for the adapter and then only the device |
| with the same SSID can interconnect to the adapter. If you want to |
| add one of the networks nearby to the profile list, pull down the |
| menu, all the networks nearby will be listed and you can add one |
| of them to the profile list. |
Power Saving Mode | The power saving function is only available when the network type |
| is in Infrastructure. |
| CAM( Constantly Awake Mode) – The adapter will always be set |
| in active mode. |
| Power Saving Mode – Place the adapter into power saving mode |
| when it is idle. |
|
|
Parameter | Description |
|
|
Network Type | Infrastructure – This operation mode requires the presence of an |
| 802.11 Access Point. All communication is done via the Access |
| Point or Router. |
| - 17 - |
