at*e2apc?
Response: *E2APC: 0,1,0,0 Power cycle the modem. Interrogate modem: at*e2apc?
Response: *E2APC: 1,1,0,0 (Remote Access enabled)
General
======
AT+CGMR
This command will cause the Sony Ericsson module to display its type/version.
Response: R6A023 CXC1122528 (Example).
AT+CBST?
This command gives information regarding the cellular network bearer channel.
Response: 0,0,1 (Autobaud rate, Asynchronous, Non transparent).
S Registers: |
|
|
|
S0= Number of rings to answer. | Range |
| |
S2= Escape sequence character | Range |
| |
S3= CR character | Range |
| |
S4= LF character | Range |
| |
S5= Back space character | Range | ||
S6= Wait before blind dialling | Range |
| |
S7= Wait for carrier | Range | ||
S8= Comma Pause time | Range |
| |
S10= Carrier loss to hang up time | Range | ||
* Compatibility only |
|
| |
Modem result codes: |
|
| |
Numeric | Verbose | Legend |
|
0 | OK | Command line executed without errors. |
|
ASL Holdings Limited | 19/09/2005 | 15 | |
Draft Copy Version 2c |
|
|