Storage

Cleaning and Storage

1.Disengage the blade control switch, move the motion controls outward to the park position, stop the engine, and remove the key.

2.Remove grass clippings, dirt, and grime from the external parts of the entire machine, especially the engine. Clean dirt and chaff from the outside of the engine cylinder head fins and blower housing.

Important: You can wash the machine with mild detergent and water. Do not pressure wash the machine. Avoid excessive use of water, especially near the control panel, engine, hydraulic pumps, and motors.

3.Service the air cleaner; refer to Servicing the Air Cleaner in the Engine Maintenance section.

4.Grease and oil the machine; refer to the Lubrication section.

5.Change the crankcase oil and filter; refer to Servicing the Engine Oil in the Engine Maintenance section.

6.Check the tyre pressure; refer to Checking the Tyre Pressure in the Drive System Maintenance section.

7.Charge the battery; refer to Servicing the Battery in the Electrical System Maintenance section.

8.Check the condition of the blades; refer to Servicing the Cutting Blades in the Cutter Deck Maintenance section.

9.Prepare the machine for storage when non-use occurs over 30 days. Prepare the machine for storage as follows.

10.Add a petroleum based stabilizer/conditioner to the fuel in the tank. Follow the mixing instructions from the stabilizer manufacturer. Do not use an alcohol based stabilizer (ethanol or methanol).

Note: A fuel stabilizer/conditioner is most effective when mixed with fresh petrol and used at all times.

Run the engine to distribute the conditioned fuel through the fuel system (5 minutes).

Stop the engine, allow it to cool, and drain the fuel tank; refer to Draining the Fuel Tank in the Fuel System Maintenance section.

Restart the engine and run it until it stops.

Choke the engine. Start and run the engine until it will not start.

Dispose of fuel properly. Recycle pursuant to local codes.

Important: Do not store stabilizer/conditioned petrol over 30 days.

11.Remove the spark plug(s) and check its condition; refer to Servicing the Spark Plug in the Engine Maintenance section. With the spark plug(s) removed from the engine, pour two tablespoons of engine oil into the spark plug hole. Use the starter to crank the engine and distribute the oil inside the cylinder. Install the spark plug(s). Do not install the wire on the spark plug(s).

12.Clean any dirt and chaff from the top of the cutter deck.

13.Scrape any heavy buildup of grass and dirt from the underside of the cutter deck, then wash the cutter deck with a garden hose.

14.Check the condition of the drive and cutter deck belts.

15.Check and tighten all bolts, nuts, and screws. Repair or replace any part that is worn or damaged.

16.Paint all scratched or bare metal surfaces. Paint is available from your Authorized Service Dealer.

17.Store the machine in a clean, dry garage or storage area. Remove the key from the ignition switch and keep it in a memorable place. Cover the machine to protect it and keep it clean.

43

Page 43
Image 43
Hayter Mowers RZT420H manual Cleaning and Storage

RZT420H specifications

The Hayter Mowers RZT420H is a cutting-edge lawn mower designed for those who demand efficiency and superior performance while maintaining their gardens. This machine combines innovative technology with user-friendly features to deliver a top-notch mowing experience.

One of the standout features of the RZT420H is its robust 42-inch cutting deck, ideally suited for medium to large lawns. This size allows for swift mowing while ensuring a clean and even cut. The cutting deck is made from high-quality materials, providing durability and resistance against wear and tear. Additionally, the deck’s design is optimized for excellent airflow, enhancing the cutting and mulching performance.

Powering the RZT420H is a reliable 20 HP Kohler engine. This engine provides ample power to handle tough grass conditions, ensuring that you can mow through dense areas without bogging down. The hydrostatic transmission allows for smooth, effortless speed changes, giving users precise control over their mowing speed. Whether navigating tight corners or tackling open fields, the hydrostatic system ensures a seamless mowing experience.

A significant advancement in the RZT420H is its zero-turn capability. This feature enables the mower to pivot around obstacles with ease, reducing the time spent trimming and maneuvering. This agility is complemented by a comfortable operator station, which includes an adjustable seat and user-friendly controls, ensuring that mowing is a pleasurable activity rather than a chore.

The RZT420H is also equipped with a range of convenience features. The easy-to-access maintenance points simplify routine care, making it easier to keep the mower in optimal working condition. Additionally, the mulching kit allows for effective grass recycling, returning nutrients to the lawn while minimizing yard waste.

Furthermore, the RZT420H boasts a compact design, which is particularly advantageous for storage and transport. Its exceptional build quality, combined with cutting-edge technology and thoughtful design details, makes the Hayter Mowers RZT420H a remarkable choice for homeowners seeking a reliable and efficient lawn maintenance solution. In conclusion, this mower brings together power, precision, and convenience, making it a worthy investment for any lawn care enthusiast.